Figure 308 Enabled Mpt-Hl/Mpt-Hlc On Core-E - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Enable equipment
Figure 308 Enabled MPT-HL/MPT-HLC on Core-E
5.
To enable an E1/DS1 P32E1DS1 card
1. To enable an E1/DS1 P32E1DS1 card
492
Caution: When parallel radio paths exist between two MSS shelves, port
segregation should be provisioned between the parallel radio paths at both ends
to prevent a loss of traffic.
Verify port segregation provisioning. Port segregation should be provisioned
between parallel MPT-HL/MPT-HLC radio paths at both ends when they exist on
the NE. Port segregation should be provisioned between the Core MPT-HL/
MPT-HLC port and other Ethernet and/or radio ports where connectivity is not
desirable. See Provision port segregation/connectivity
provision port segregation.
Select MSS-n/Slot# (slot 3 through 8) in the resource tree area where the
P32E1DS1 card will be enabled. The selected slot will highlight in blue. This
selection also highlights the selected slot in blue on the graphical representation
of the MSS shelf in the resource list area. See
WebEML User Manual
for detailed steps to view/
Figure 309.