Figure 633 Mpt-Hls Additional Settings Tab - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
Configure radio parameters
52. Select Rx Radio Protection in the resource tree area.
53. From the Restoration Criteria panel, verify the Restoration Criteria selection and
54. Provision the MPT-HLS link identifier
Figure 633 MPT-HLS Additional Settings tab
55. Provision MPT-HLS radio link identifier:
844
provision if required:
i. Select the Not Revertive or Revertive radio button.
ii. Select the Physical Cable check box in the RPS Configuration area if an
RPS cable is in use.
iii. Click Apply.
Open the appropriate radio main view depending on your radio configuration
and select the Additional Settings tab; see
i. Select the Link Identifier Configuration Enabled check box.
WebEML User Manual
Figure 633.