Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
66 OAM Remote Loopback
66.1 Purpose
The procedures in this chapter are used to perform an EFM OAM remote loopback.
66.2 General
A loopback can be performed on an operational EFM OAM link.
The following conditions must be satisfied in order to activate remote loopback:
66.3 Procedure
This section provides the following procedures:
To activate OAM Remote Loopback
1. From the Main Menu Bar, select Configuration >ETH OAM Configuration.
• Local DTE in Active mode
• Operational Status value is Operational
• Remote DTE supports Remote Loopback function
• Local DTE not in loopback mode
Note: OAM Remote loopbacks do not generate an Abnormal Condition.
•
To activate OAM Remote Loopback
•
To activate OAM Remote Loopback
The ETH OAM Configuration window opens. See
OAM Remote Loopback
Figure
733.
975
Advertisement
Table of Contents
