Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Table 6
Configurations in monodirectional links (Continued)
Parameter
No Tx Radio Alarms alarm profile
Tx Mute
Space diversity combiner for
MPT-HLS
RF switch for MPT-HLS
59.3 Prerequisites
To provision a radio, the supporting radio port (card, or card plus port) must be
provisioned before beginning the procedures in this chapter.
59.4 Procedures
This section provides the following procedures:
Tx only node
—
—
Should not be equipped on the
Tx side
Should be mounted and
connected
•
To open the Radio Main View
•
To administer the MPT-HL transceiver
•
To provision the MPT-HLC transceiver
•
To administer the MPT-HLS transceiver
•
To administer the MPT ODU
•
To provision the radio for fixed modulation using data help
•
To provision the radio for adaptive modulation using data help
•
To administer the Tx Mute settings
•
To administer the ACM Manual settings
•
To remove XPIC
Configure radio parameters
Rx only node
Must be configured in the radio
panel (otherwise all the Tx Radio
alarms will be raised)
Transmitter must be muted with
Tx Mute command
Can be equipped only on the
receiver side
Should be mounted and
connected
787