Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
To provision Per-VLAN Per-CoS (Class of Service) rate limiting
1. Provision Per-VLAN Per-CoS Rate Limiter parameters using the following
Caution: When a Per-VLAN Per-CoS Rate Limiter is activated in conjunction with a Port
Rate Limiter, the Per-VLAN Per-CoS Rate Limiter must apply to Ethernet frames that meet
the Port Rate Limiter parameters.
Figure 248
Provision Per-VLAN Per-CoS rate limiting
a
b
e
d
c. Provision VLAN Rate Limiter - Ingress mode?
a. To enable, select VLAN Enabled (checked), then go to step d.
b. To disable, select VLAN Enabled (unchecked), then go to step f.
d. VLAN Select the Ingress CIR value (Kbit/s).
e. Select the Ingress Max Burst size (Kbit/s).
f. Click on the Apply button.
procedure. See
Figure
c
248.
h
Provision Ethernet ports
f
g
23045
423