Nokia 9500 MPR User Manual page 326

Release 7.0.0 3DB 19286 ACAA Issue 01
Administer L1/L2 radio and L2 Ethernet LAG
ports
2. To disable an L2 Ethernet or L1/L2 Radio LAG port.
Note: For a detailed procedure to disable L2 Ethernet or L1/L2 Radio LAG port, see
LAG
3. Remove Ethernet or Radio ports from LAG.
Note: For a detailed procedure to remove Ethernet or Radio ports from a LAG port, see
remove Ethernet or radio ports from a LAG
4. From the Configured LAGs pane, select LAG to destroy. See
5. From the Configured LAGs pane, click Destroy.
6. Click Yes.
To administer PPP RF configuration
1. Select action.
2. Enable PPP RF on radio LAG port
326
− Port Segregation
− VLANs
− If L1 radio LAG port, synchronization reference
− If L1 radio LAG port, PPP RF enabled
− If L1 radio LAG port, SSM enabled
port, step 2.
The Confirm operation window displays.
The L2 Ethernet or L1/L2 Radio LAG port is removed from the Configured LAGs
pane.
a. To Enable PPP RF on radio LAG
b. To Disable PPP RF on radio LAG
Using the LAG Configuration Tool Settings tab, enable PPP RF configuration
using the following procedure: See
WebEML User Manual
port, step 1.
port, go to step 2.
port, go to step 3.
Figure 179.
Disable
To
Figure 167.