Release 7.0.0 3DB 19286 ACAA Issue 01
Open and run performance monitoring
The 24-h PM data is always stored in the History Data report.
Default and Elaborated PM counters are available. Default counters are collected on
the NE. Elaborated counters are calculated on the PC.
67.3 Procedures
This section provides the following procedures:
To open the PM tool
1. From the main toolbar, select the PM Tool icon (see
Figure 735
PM Tool icon
980
•
To open the PM tool
•
To run PM on an Ethernet port
•
To run PM for compression gain statistics
•
To run PM on a radio Ethernet port
•
To run PM on an L1 radio LAG port
•
To run PM on a radio port
•
To run Adaptive Modulation PM on a radio port
•
To run PM on a PDH port
•
To run PM on an SDH port
•
To run RSL History PM
•
To create a TCA threshold
•
To modify a TCA threshold
•
To delete a TCA Threshold
•
To assign TCA Alarm thresholds to Radio Channels/Link
•
To view PM data
•
To export PM history data
main menu bar, select Diagnosis>Performance Monitoring.
The Acknowledgement of Authorization dialog box opens; see
WebEML User Manual
Figure
735) or from the
Figure
736.