Figure 649 Mpt-Hqam Settings Tab For Fixed Modulation - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
Figure 649 MPT-HQAM Settings tab for fixed modulation
40. Provision the radio port:
i. In the Mode field, select the Preset radio button.
ii. For MPT-HQAM transceivers only, select the MPT-HC Compatibility check
box to configure the MPT-HQAM with a profile that is compatible with an
MPT-HC, if required. See
iii. From the Reference Channel Spacing drop-down menu, choose the
desired channel spacing (5 MHz, 10 MHz, 30 MHz, 40 MHz, or 50 MHz).
iv. From the Modulation drop-down menu, choose modulation scheme (32
QAM, 128 QAM, or 256 QAM).
v. From the Option drop-down menu, choose gain configuration (Std or Std/
XPIC).
vi. From the Channel #1 Shifter (MHz) drop-down menu, choose the shifter
value.
vii. Enter the TX Frequency within the allowed range.
viii. The Rx Freq (KHz) displays the Rx RF Frequency.
Configure radio parameters
Figure 649.
863