Figure 733 Eth Oam Configuration Window With Operational Link - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
OAM Remote Loopback
Figure 733 ETH OAM Configuration window with operational link
2. From the list, choose the interface that you need to create the loopback on.
3. In the Link OAM Loopback pane, choose the Start check box in the OAM
4. Click on the Apply button.
To deactivate OAM Remote Loopback
1. From the Main Menu Bar, select Configuration >ETH OAM Configuration.
976
Remote Loopback field.
The loopback is enabled. The Link OAM Loopback Status is updated to Remote
Loopback, see Figure 734.
The ETH OAM Configuration window opens. See
WebEML User Manual
Figure 734.