Release 7.0.0 3DB 19286 ACAA Issue 01
Provision Ethernet ports
Figure 245
Provision Core/EAS rate limiting by port
a
b
c
d
e
g
h
i
420
a. Select Ethernet Port#n to provision (Ethernet Port #1/#8).
b. Select Policy & Translation tab.
c. Provision Ingress Port Rate Limiter mode?
a. To enable, select Ingress Enabled (checked), then go to step d.
b. To disable, select Ingress Enabled (unchecked), then go to step f.
c. If no, go to step g.
d. Select the Ingress CIR value (Kbit/s).
e. Select the Ingress Max Burst size (Kbytes).
f. Click on the Apply button.
g. Provision Egress Port Rate Limiter mode?
a. To enable, select Egress Enabled (checked), then go to step h.
b. To disable, select Egress Enabled (unchecked), then go to step j.
h. Select the Egress CIR value (Kbit/s).
i. Select the Egress Max Burst size (Kbit/s).
f
j
WebEML User Manual
22917