Figure 205 Ethernet To Radio Cross Connection - Nokia 9500 MPR User Manual

Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
1. Verify port segregation provisioning. Port segregation should be provisioned
2. Select ETH port and drag to draw line to Radio port.
Figure 205 Ethernet to Radio Cross Connection
3. On the RADIO-ETH pop-up, enter Flow ID number in the Flow ID field.
Note: Ranging is supported for RADIO-ETH cross-connection entry.
between parallel radio paths at both ends when they exist on the NE. When
making a cross connection to one of parallel radio ports, port segregation should
also be provisioned between the Ethernet port and all other parallel radio ports.
Also port segregation should be provisioned between the Ethernet and radio
ports and other Ethernet and/or radio ports where connectivity is not desirable.
See Provision port segregation/connectivity
port segregation.
RADIO-ETH pop-up displays. See
Provision cross connections
for detailed steps to view/provision
Figure 205.
371