Table of Contents
Advertisement
Release 7.0.0 3DB 19286 ACAA Issue 01
WebEML User Manual
2. In the Filter Name field, enter the name of the new filter.
3. From the scope partition, select the NE to apply the new filter or select the All
4. From the scope partition select alarms to filter.
check box to select all NEs currently being monitored.
− Current: Select current to filter current alarms only.
− Log: Select log to filter current and cleared alarms.
Filters can be created selecting one or more of the following parameters:
a. Alarm Type: Select Alarm Type check box to create a filter using alarm type
to filter alarms. Select all desired alarm types to include in the filter.
• TRS: Transmission Alarm
• Equipment: Equipment Alarm
• EXT: External Alarm
b. Perceived Severity: Select Perceived Severity check box to create a filter
using alarm severities to filter alarms. Select all desired alarm severities to
include in the filter.
• Critical
• Major
• Minor
• Warning
• Cleared
• Indeterminate
c. Event Time: Select Event Time check box to create a filter for a specific
time period.
• Select From check box and enter the start date (dd/mm/
yyyy:hh:mm:ss)
• Select To check box and enter the end date (dd/mm/yyyy:hh:mm:ss)
d. Probable Cause: Select Probable Cause check box to create a filter for
specific alarms. Select one or more probable cause to filter for the selected
alarms only.
e. Resource: Select Resource check box to create a filter for specific friendly
name parameters. Example; to filter for all alarms associated with direction
#5 channel#1, enter "dir*5*ch*1". The "*" character is the wildcard for
resource string entry.
View alarms
255
Advertisement
Table of Contents
