Chapter 1 What Is The Got; About The Got; Procedures For Monitoring The Plc Cpu By Got - Mitsubishi Electric Got 1000 Training Manual

Chapter 1 What is the GOT?

1.1 About the GOT

1.2 Procedures for monitoring the PLC CPU by GOT

1) Create a screen to be displayed
in GOT using GT Designer2,
software for creating monitor
screens.
2) Transfer the created monitor
screen data to GOT.
3) Start monitoring after
connecting to PLC CPU.
The GOT (Graphic Operation Terminal) can be used as an electronic operation panel
that enables such as switch operation, lamp display, data display, and message
display on the monitor screen, which had been conventionally implemented with a
control box.
Space saving
Cost reduction
(The illustration shows GT15
Operation Stop
Display pane figures known as
objects-such as the switch figure,
lamp figure, and numerical display,
PC
etc.-are pasted to create the screen.
(CF card)
USB
Cable
(RS-232C
Cable)
PC
Operation Operation
lamp lamp
Operation Operation Stop
Data 600
GOT
1 - 1
.)
Operation
lamp
Data
0
Operation lamp Operation lamp
Operation Stop Operation
Data 0
GOT
PLC CPU