Single Source With Multiple Rspan Tunnels; Multiple Sources With Multiple Rspan Tunnels - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 51 Monitoring Network Traffic Using SPAN
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 51-16

Single Source with Multiple RSPAN Tunnels

Figure 51-17
has an associated ST port in the source switch and a separate SD port in the destination switch. This
configuration is useful for troubleshooting purposes.
Figure 51-17
SPAN
sources

Multiple Sources with Multiple RSPAN Tunnels

Figure 51-18
tunnels have an associated ST port in their respective source switch and terminate in the same SD port
in the destination switch.
OL-18084-01, Cisco MDS NX-OS Release 4.x
RSPAN Scenario with One Source Switch, One Destination Switch, and One Tunnel
Cisco MDS
source switch S
RSPAN tunnel
ST
displays two separate RSPAN tunnels configured between Switches S and N. Each tunnel
RSPAN Scenario with One Source Switch, One Destination Switch, and Multiple
Tunnels
Cisco MDS
source switch S
ST ST
displays two separate RSPAN tunnels configured between Switches S1 and S2. Both
Cisco MDS
Switch B
Cisco MDS
Fibre Channel
fabric
Cisco MDS
Switch C
Cisco MDS
Switch B
RSPAN tunnels
Cisco MDS
Fibre Channel
fabric
Cisco MDS
Switch C
Cisco MDS 9000 Family CLI Configuration Guide
Remote SPAN
Cisco MDS
destination switch D
SD
FC analyzer
Cisco MDS
destination switch D
SD SD
FC analyzer FC analyzer
51-29