Managing D9824 Web Gui Accounts - Cisco D9824 Installation And Configuration Manual

Managing D9824 Web GUI Accounts

You can define up to 10 usernames/passwords for login use via web GUI session on
the D9824 receiver.
When a user tries to login, the user is required to provide a username and a
password. The user is granted access only if this username/password pair exists in
the authentication table.
The factory preset "Admin" account has Admin privileges and is allowed to add new
users, delete users, change usernames, and modify its own password. Users with
non-Admin privileges (for example, User and Guest) are only allowed to modify
their own passwords.
Configuring the User Login Passwords
1 From the user interface of the D9824, click System Settings > Security/Accounts
> Account Management. The Account Management page is displayed.
To configure the password complexity for all users:
Note: This feature is only available to a user with Admin privileges only.
2 Set the Password Complexity (No Checking, Minimal Checking, Full
Complexity Checking). Any changes take effect immediately, and do not require
the use of the Apply button.
The following describes the rules for each level:
78-4039426-01 Rev D
Configuring System Settings
203