Chapter 6 - Creating Waypoints
Transferring waypoints to and from a PC
Page 96
DATABASE FULL and the status-bar message TRANSFER
ERROR.
If there is no problem with the transfer process, when
done, the status bar displays the message TRANSFER
COMPLETE. You can now press any key to resume other
operations.
If you store a large number of waypoints (or routes) in the
unit, or if your waypoints are the only record you have of
important locations, you may want to keep a separate copy of
them by transferring them to your personal computer, using
special transfer software provided by third-party vendors and a
Northstar loader cable (part number 1100-LC). With this com-
bination, you can copy, edit, or plot waypoints and routes, and,
most important, if these waypoints and routes are accidentally
erased or lost due to equipment failure, you can reload them
from your PC back to your unit. For transfer software and
instructions, and cable ordering information, consult your
authorized Northstar dealer.
951/952 Operator's Manual Rev. B