Saving A Route As You Travel - NorthStar 951X Operator's Manual

Chapter 7 - Creating Routes

Saving a route as you travel

Page 102
the (17(5 key; if the 86( &+$57 menu key is already
displayed, press (17(5 to continue using the list.
5. At the NEW ROUTE screen, press the ,16(57 menu key.
The SELECT WAYPT screen appears, which lists all of your
stored waypoints. To switch between the LOCAL and
ALPHA waypoint lists, press the 1(;7 9,(: key.
6. Move the cursor to select the desired waypoint from the
displayed list and press the (17(5 key. The selected way-
point is now in your route.
7. Repeat Steps 5 and 6 until your new route is complete. To
see the route at any time on the CHART screen, press the
&+$57 menu key; once there, to return to the NEW
ROUTE screen, press the 5(7851 menu key.
Another way to create a route is to travel the length of the
desired route, pressing the 6$9(02% key at each waypoint
you want to store in the route. The unit's save-route function
makes this a very simple process. In summary, you first tell the
unit that you want to save a route as you travel, then press the
6$9(02% key as you pass each waypoint, and then tell the
unit to stop saving the route when you come to the end of the
route.
6$9(02%
Press
MAN OVERBOARD
entering
To begin saving a route as you travel:
1. Press the :$<3765287(6 key, and then press the
5287(6 menu key to access route functions. The
ROUTES screen is displayed:
CAUTION!
briefly—less than 3 seconds—to avoid
mode!
951/952 Operator's Manual Rev. B