951/952 Operator's Manual Rev. B
67$57
the
key again to re-start the entire transfer process (this means
that all waypoints and routes, not just the ones already in the receiving
unit and the ones left to be transferred, are re-transferred).
1. Select the unit you'd like to use as the master. Remember:
You can use either of the two units because both units are
capable of importing or exporting waypoints and routes.
2. At the master unit, press the :$<3765287(6 key to
display the WAYPTS AND ROUTES screen.
3. Press the ,03257(;3257 menu key to display the
IMPORT/EXPORT screen.
Chapter 6 - Creating Waypoints
Page 91