Creating Routes From The Chart - NorthStar 951X Operator's Manual

Creating routes from the chart

951/952 Operator's Manual Rev. B
To create a route graphically from the CHART screen:
1. Press the :$<3765287(6 key, and then press the
5287(6 menu key. The names of routes already stored
are displayed on the ROUTES screen.
2. Press the 1(: menu key. The NEW ROUTE screen is dis-
played, asking you to enter the name of the new route.
3. Enter the name of the new route using the .(<3$' and
&85625 3$' (see Section 3, "Using the Controls," start-
ing on page 31), and press the (17(5 key.
Chapter 7 - Creating Routes
Page 99