951/952 Operator's Manual Rev. B
Chapter 8 - Understanding Waypoint/Route Navigation
2. To select the type of coordinates you want to enter—lat/
lon, distance and bearing, or loran TDs—press the &225'
7<3( menu key to show the type you want to use:
•
latitude/longitude of any point in the world
•
distance and bearing from "here" (your present posi-
tion), or from any waypoint in the unit's memory
•
loran TDs (make sure the GRI displayed is correct;
change it if necessary).
(For details on using the different types of coordinates
available, see "Displaying waypoint coordinates" starting
on page 85.)
3. Enter the coordinates of the waypoint (just as you would
normally when adding a waypoint). (If you like, you can
specify a waypoint to navigate to and store it permanently
in the unit's database--in one operation. While on the
QUICK WAYPT screen, move the cursor arrow up to the
waypoint's name and change it from -QUIK- to its perma-
nent name, before pressing the (17(5 key.)
4. Press the (17(5 key twice.
The unit stores the waypoint as a "–QUIK–" waypoint and
immediately begins navigating to it. The QUIK waypoint
remains in the unit's memory until you designate the next
QUIK waypoint.
Page 117