Creating Routes From A Waypoints List - NorthStar 951X Operator's Manual

Creating routes from a waypoints list

951/952 Operator's Manual Rev. B
A line is drawn on the NEW ROUTE screen connecting the
waypoints, with small arrows indicating the direction of
the route.
Waypoints that are newly created as you travel are named
(0001), (0002), etc., as you enter them. The parentheses ( ) indi-
cate that the waypoint is part of a saved route, and the
four-digit number is used to uniquely identify each waypoint.
Each waypoint is automatically given a description consisting
of the time and date the waypoint was stored. You can change
waypoint names at any time by using the edit waypoint func-
tion (see "Editing waypoints" starting on page 85).
To create a route from a list of existing waypoints:
1. Press the :$<3765287(6 key, then press the 5287(6
menu key.
2. At the ROUTES screen, press the 1(: menu key. The NEW
ROUTE screen is displayed, asking you to enter the name
of the route.
3. Enter the name of the route using the .(<3$' and &85
625 3$'.
4. If necessary, press the 86( /,67 menu key to change the
entering style from chart-based to list-based, then press
Chapter 7 - Creating Routes
Page 101