Chapter 7 - Creating Routes
Page 112
3. If you want to change the route's name, do so now.
4. If necessary, press the 86( /,67 menu key to change the
editing style from chart-based to list based (the 86( /,67
menu key should now read 86( &+$57, indicating that
you can press it to return to chart-based editing). Press
the (17(5 key to continue using the list. A more detailed
EDIT ROUTE screen appears, displaying all the waypoints
in the route.
5. From this point, you can either add or remove waypoints,
as described below.
Adding waypoints to a route
1. On the EDIT ROUTE screen, press the &85625 3$' to
move the pointer to the spot in between the two existing
waypoints where you want to insert another waypoint. (To
add a waypoint to the beginning, be sure to position the
pointer above the first waypoint.)
2. Press the ,16(57 menu key. The SELECT WAYPT screen
appears, which lists all your stored waypoints. To switch
951/952 Operator's Manual Rev. B