Chapter 9 - Using Nav Log
Restarting navigation
Page 130
tion (that is, to re-enable the nav log function), you must go to
a newly designated waypoint(s).
You can restart navigation along any leg or to any waypoint of
the route by moving the cursor arrow to the waypoint or leg,
and pressing the 5(67$57 menu key.
When a waypoint is selected, a black triangle (magenta in the
night palette) points to the waypoint.
When a leg is selected, a black arrow is displayed, pointing
from the first waypoint to the second.
951/952 Operator's Manual Rev. B