951/952 Operator's Manual Rev. B
Chapter 8 - Understanding Waypoint/Route Navigation
•
If you don't need to return to the original course line, you
can continue directly to the waypoint (Course 2 above)
using the restart function. To restart your course line from
your present position, display either the NAV LOG screen
(by pressing the 1$9 /2* key) or the VESSEL CHART
screen (by pressing the 326,7,21 key). Press the
5(67$57 menu key, then the (17(5 key.
The unit recomputes the course line to extend from your
present position directly to the next waypoint, resetting your
cross-track error to zero.
Page 125