NorthStar 951X Operator's Manual page 117

951/952 Operator's Manual Rev. B
Adding waypoints to the beginning of a route
To add waypoints to the beginning of a route:
1. Press the &85625 3$' to select the first waypoint in the
route (its name is displayed in the INFO BAR). The menu
key $'' 72 )5217 is now shown.
2. Press the $'' 72 )5217 menu key, then move the cur-
sor to the location of the waypoint you want to add to the
beginning of the route. As you move the cursor, the unit
displays a new leg—represented by a dotted line—from the
first waypoint to the cursor position.
Chapter 7 - Creating Routes
Page 107