NorthStar 951X Operator's Manual page 173

Chapter 11 - Customizing the Unit
ting (in the DISPLAY OPTIONS menu) to enable your choice of
either feet or meters in the cross-track display.
The STEER DIST PRECISION option offers an extra level of
Adjusting
accuracy to the distance-to-waypoint and cross-track error dis-
steering-distance
plays on both the STEERING and 3-D STEER screens. Situated
precision
in the upper-left portion of the screens, the distance-to-way-
point is usually displayed in hundredths of miles or kilome-
ters.
However, if you change the STEER DIST PRECISION settings
from NORMAL to HIGH, the distance-to-waypoint and
cross-track error are displayed in feet or meters, whenever
you're less than one mile or one kilometer from the destina-
tion waypoint.
To change the setting, press the (',7 menu key and press the
&85625 3$' to view the available choices. Press the (17(5
key to make your selection, or &/($5 to leave the option
unchanged.
Both steering screens will reflect your preference when you're
less than one mile or kilometer from your destination.
951/952 Operator's Manual Rev. B Page 163