NorthStar 951X Operator's Manual page 116

Chapter 7 - Creating Routes
Page 106
2. Press the &85625 3$' to select the route you want to
change. Press the (',7 menu key. The name of the route
is displayed on the EDIT ROUTE screen.
3. If you want to change the route's name, do so now.
4. If you want to use chart-based editing, there should be a
menu key called 86( /,67 on the EDIT ROUTE screen. If
the menu key reads 86( &+$57, press it once so that it
reads 86( /,67, then press the (17(5 key.
The EDIT ROUTE chart screen is displayed, showing the
route you selected. The direction of the route is indicated
by a series of small arrows in each leg, and the cursor is
situated in the middle of the screen.
951/952 Operator's Manual Rev. B