Huawei FusionDC1000A Installation Manual page 86

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
3.
Issue 01 (2021-04-20)
Figure 8-15 Installing the 4G antenna
Remove the three plastic sealing rings from the sealing plate screws holes in
the suspended ceiling, and loosen the four M4 captive screws securing the
sealing plate.
NO TICE
When removing the sealing plate from the suspended ceiling, assign one
person to remove the screws while the other holds the sealing plate. Pay
attention not to damage the light inside the ceiling plate.
Figure 8-16 Removing the sealing plate from the suspended ceiling
Copyright © Huawei Technologies Co., Ltd.
8 Installing Devices Inside the Pre-fab. Module
79