Huawei FusionDC1000A Installation Manual page 77

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
Figure 8-2 Installing battery modules
(1) Full-capacity cabinet configuration
Step 4 Remove the front covers from battery modules, and install battery baffle plates.
Figure 8-3 Installing battery baffle plates
Issue 01 (2021-04-20)
NO TE
This section uses full-capacity cabinet configuration as an example to describe how to
install battery modules. The actual configuration prevails.
NO TE
Place the front covers properly to prevent the light pipes from falling off.
Copyright © Huawei Technologies Co., Ltd.
8 Installing Devices Inside the Pre-fab. Module
(2) Half-capacity cabinet configuration
70