Removing Sliding Door Fasteners - Huawei FusionDC1000A Installation Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
----End

7.3 Removing Sliding Door Fasteners

Preparations
Tool: adjustable wrench
Materials: none
Skill requirement: common technician
Context
The three hot aisle sealing doors and the door between the entrance hall and the
equipment compartment in a pre-fab. module are all glass sliding doors. Fasteners
are installed on the glass sliding doors to prevent the doors from being damaged
during transportation.
After the pre-fab. module is installed and secured, the fasteners need to be
removed so that the sliding doors can work properly.
Issue 01 (2021-04-20)
Figure 7-8 Removing the transport fasteners on the top of the UPS cabinet
and SmartLi
NO TE
Keep the removed sliding door fasteners for future use in case the pre-fab. module needs to
be relocated.
Copyright © Huawei Technologies Co., Ltd.
7 Removing Transport Protection Materials
66