Huawei FusionDC1000A Installation Manual page 16

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
●
Drilling Holes
When drilling holes into a wall or floor, observe the following safety precautions:
Do not drill holes into the equipment. Doing so may affect the electromagnetic
shielding of the equipment and damage components or cables inside. Metal
shavings from drilling may short-circuit boards inside the equipment.
●
●
●
Moving Heavy Objects
When removing a heavy or unstable component from a cabinet, be aware of
unstable or heavy objects on the cabinet.
●
Issue 01 (2021-04-20)
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
– Keep your body steady.
– Do not climb higher than the fourth rung of the ladder from the top.
– Ensure that your body's center of gravity does not shift outside the legs
of the ladder.
NO TICE
Obtain the consent from the customer and subcontractor before drilling.
Wear goggles and protective gloves when drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings that have accumulated inside or outside the equipment.
D ANGER
Be cautious to avoid injury when moving heavy objects.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
9