C Cleaning Pre-Fab. Modules - Huawei FusionDC1000A Installation Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
Prerequisites
Pre-fab. modules have been installed.
Preparations
Tools: long-handled soft brush, barrel, vacuum cleaner, cotton cloth
Materials: detergent and clean water
Skill requirement: common technician
Procedure
Step 1 Clean the interior of a pre-fab. module.
1.
2.
3.
Step 2 Clean the exterior of a pre-fab. module.
1.
2.
3.
----End
Issue 01 (2021-04-20)
C
Cleaning Pre-fab. Modules
Clean metal scraps in all holes drilled inside the pre-fab. module.
Clear all smudges inside the pre-fab. module.
Clean visible rubbish and dust inside the pre-fab. module.
Clean up sundries (such as iron scraps) on the pre-fab. module exterior.
Clear dust, rain marks, or stains on the outer panels of the pre-fab. module
using a long-handled soft brush dipped with alkaline or neutral detergent.
Wash the pre-fab. module with clean water.
NO TE
It is recommended that you clean the pre-fab. modules once every quarter.
Copyright © Huawei Technologies Co., Ltd.

C Cleaning Pre-fab. Modules

121