FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
●
Figure A-1 Cable ties without sharp burs
Figure A-2 Cable ties in the same direction
Bending Cables
When bending cables, observe the following rules:
●
●
●
A.1.2 Measuring Cables
Prerequisites
●
●
Preparations
Tools: thin rope, protective gloves, and measuring tape
Material: cable
Skill requirement: common technician
Issue 01 (2021-04-20)
Extra cables must be coiled neatly and easy to find.
Cables must not be overly bent because over bending may damage the cable
cores.
The curvature radius of cables should meet the local requirements and
standards.
Cables must not be tied where they bend.
Figure A-3 Binding cables at a turning point
The pre-fab. module has been installed.
External cable trays have been installed.
Copyright © Huawei Technologies Co., Ltd.
A Basic Installation Operations
106