Pre-Fab. Module Safety - Huawei FusionDC1000A Installation Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
Refrigerant Frostbite
Refrigerant leakage may cause frostbite. Take protective measures (for example,
wear antifreeze gloves) when handling refrigerant.
Storage and Recycling
●
●
●

1.7 Pre-fab. Module Safety

●
●
●
●
●
Issue 01 (2021-04-20)
Do not store devices near a heat source or under direct sunshine.
Keep devices away from fire or high-temperature objects, especially devices
injected with pressurized nitrogen or refrigerant; otherwise, explosion or
refrigerant leakage may occur, causing personal injury.
The sign indicates that the product cannot be disposed of with other
wastes that have a shell in European Union (EU) areas. To avoid environment
pollution and harm to human health, wastes must be classified and recycled.
This also promotes resource reuse. When recycling a device, fill in the device
information in the recycling collection system or contact your dealer for help.
The dealer can help you recycle devices in a safe and environment-friendly
way.
Ensure that the installation environment meets the following requirements:
– The ground must be solid without spongy or soft soil, and is not prone to
subsidence.
– The site must be clean and far away from dust, oil fume, and harmful
gas.
– The site must be far away from corrosive, flammable, and explosive
materials.
– The site must be far away from sources of strong variation, loud noises,
and strong electromagnetic interference.
– The site must not be located in a low-lying land or an area prone to
water accumulation. It must be above the highest water level of the local
area.
Do not install other equipment on the top of a pre-fab. module without
evaluation by Huawei.
When performing operations (such as installing an awning or outdoor unit)
over the top of a pre-fab. module, take measures to protect the top of the
pre-fab. module against damage. Do not perform operations such as arc
welding, drilling, and cutting on the top of a pre-fab. module.
Do not smoke or use open flame inside a pre-fab. module.
Before performing fire operations inside a pre-fab. module, obtain the
customer's approval and the required work permit and fully evaluate risks.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
11