Removing Transport Protection Materials From Fire Extinguishing And Monitoring Devices - Huawei FusionDC1000A Installation Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario)
10
Materials from Fire Extinguishing and
Context
Transport protection materials are installed for fire extinguishing and monitoring
devices to prevent them from falling off or being damaged due to strong vibration
during FusionDC1000 transportation.
Preparations
Tools: step ladder
Skill requirement: common technician
Procedure
Step 1 Get familiar with the internal layout of the FusionDC1000.
Step 2 Remove transport protection materials on top of aisles inside the FusionDC1000.
Table 10-1 Protection materials to be removed
No.
1
2
3
4
Issue 01 (2021-04-20)
Removing Transport Protection
NO TE
To prevent damage to aisle floors in the FusionDC1000, it is recommended that you remove
the protective films after the FusionDC1000 is installed.
Device
Smoke detector
Heat detector
Horn strobe
Fire alarm bell
Copyright © Huawei Technologies Co., Ltd.
10 Removing Transport Protection Materials from
Fire Extinguishing and Monitoring Devices
Monitoring Devices
Protection Materials
Securing tape and red cover
Securing tape and red cover
Securing tape
Securing tape
100