ABB IRC5 Product Manual page 48

2 Installation and Commissioning, IRC5
2.4.4. Mounting the FlexPendant holder
Continued
Procedure - On top of the control cabinet
The following procedure details how to mount the FlexPendant holder on top of the control
cabinet.
46
Action
1. Remove the protective liner from the tape.
2. Press the mounting plate with FlexPendant
holder against the top of the control cabinet.
NOTE!
The surface must be clean and dry.
3. Mount the cable bracket holder on the side of
the cabinet.
Use one of the existing M8 screws.
4. Mount the cable bracket on the cable bracket
holder using enclosed Fastite screws (4 pcs).
Note/illustration
xx0500002546
xx0700000240
• A: Cable bracket holder
xx0700000241
• A: Cable bracket
Continues on next page
3HAC021313-001 Revision: P