Replacement Of Process Interface Board - ABB IRC5 Product Manual

4 Repair activities, controller IRC5

4.27. Replacement of Process Interface Board

4.27. Replacement of Process Interface Board
About the Process Interface Board
A Process Interface Board is mounted in the controller cabinet if option DispensePac support
is used.
Location
The illustration below shows the location of the Process Interface Board.
xx0600002681
C
Required equipment
Equipment
Torx screw driver, size T25
268
Process Interface Board
Note
Used for the Process Interface Board.
Continues on next page
3HAC021313-001 Revision: P