Replacement Of Process Interface Board - ABB IRC5 Product Manual

4.24 Replacement of Process Interface Board

About the Process Interface Board
A Process Interface Board is mounted in the controller cabinet if option DispensePac
support is used.
Location
The illustration below shows the location of the Process Interface Board.
xx1300000812
A
Required equipment
Equipment
Standard toolkit
Removing the Process Interface Board
1
Product manual - IRC5
3HAC047136-001 Revision: M
A
Process Interface Board
Action
DANGER
Before commencing any work inside the cabinet, please observe the safety information
in section Make sure that the main power has been switched off on page
© Copyright 2004-2018 ABB. All rights reserved.
4.24 Replacement of Process Interface Board
Note
The contents are defined in section Standard toolkit
4 Repair
26.
Continues on next page
283