Ic200Alg431 Analog Mixed Module, 12 Bit 0 To 10Vdc Input 4 Channels And Output 2 Channels - GE VersaMax IC200PWR001 User Manual

IC200ALG431
Analog Mixed Module, 12 Bit 0 to 10 V DC Input 4 Channels and Output 2 Channels
Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
LED indicators
Backplane current consumption
Thermal derating
Configuration parameters
Diagnostics
Compatibility
HW, FW vers.
FW release
External Power Supply
Recommended range
Current consumption at recommended range
12V operation range
Current consumption at 12V range
Input Characteristics
Input voltage:
Input Impedance
Accuracy at 25 °C*
Accuracy at 0 to 60 °C
Resolution:
Filter response
Update rate per module
Common mode voltage
Channel-to-channel crosstalk rejection 30dB minimum
Output Characteristics
Output voltage
Load characteristics
Accuracy at 25 °C
Accuracy at 0 to 60 °C
Resolution
Update rate per module
Channel-to-channel crosstalk rejection 70dB minimum
Output default
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy
may be degraded to ± 1%.
GFK-1504N Chapter 12 Analog Mixed I/O Modules
4 single-ended inputs, one group,
2 single-ended outputs, one group
FFFF9024
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
5V output: 60mA maximum
None
Output default
Loss of User Side Power
PME programming
software
All
0 to 10V
120kΩ minimum
± 0.3% typical of full scale, ± 0.5% maximum of full scale
± 1% maximum of full scale
2.5mV = 8 counts
5.0ms
0.4ms
0 V
0 to 10.24 V DC
Resistive: 5000 Ω minimum
Capacitive: 1.0µF maximum
†
± 0.3% typical of full scale, ± 0.5% maximum of full scale
± 1% maximum of full scale
2.5mV = 8 counts
0.3ms maximum
Hold Last State (configurable), 0 (default)
CPU CPU CPU CPU
001 002 005 E05
AA AA AA AA
1.0 1.5 2.1 2.1
+18 to +30 V DC (including ripple)
160mA max (including load current)
9.6 to 15 V DC , 12 V DC nominal (including ripple)
175mA max.(including load current)
12
DBI EBI GBI PBI
001 001 001 001
AA AA AA AA
1.1 1.0 1.0 1.0
12-11