GE VersaMax IC200PWR001 User Manual page 294

Module Specifications
Module Characteristics
Points
Module ID
Isolation:
User input/output to logic
(optical) and frame ground
Group to group
Point to point
LED indicators
Backplane current consumption
Thermal derating
Compatibility
HW,FW vers.
FW release
Input Characteristics
Input voltage
On state voltage
Off state voltage
On state current
Off state current
On response time
Off response time
Input impedance
Output Characteristics
Output voltage
Output voltage drop
Load current
Output leakage current
On response time
Off response time
Protection
Switching frequency
Relay type
Contact type
Contact life
GFK-1504N Chapter 9 Discrete Mixed Modules
Mixed Module, Output Relay 2.0 A per Pt Isolated 8 Points /
8 Positive AC Inputs, one group.
8 Individually-isolated Form A Relay Outputs.
88048040
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
Outputs: 250 V AC continuous; 1500 V AC for 1 minute
Inputs: none
One LED per point shows individual point on/off state
OK LED indicates backplane power is present
5V output: 300mA maximum Refer to graph
None
PME programming
software
All
0 to 264 V AC (47 to 63Hz), 240 V AC nominal
155 to 264 V AC
0 to 40 V AC
4mA minimum
1.5mA maximum
1 cycle maximum
2 cycles maximum
38.5kΩ (reactive) at 60Hz, typical
46.3kΩ (reactive) at 50Hz, typical
0 to 125 V DC, 5/24/125 V DC nominal
0 to 265 V AC (47 to 63Hz), 120/240 V AC nominal
0.3V maximum
10mA per point minimum
2.0 Amps for 5 to 265 V AC maximum (resistive)
2.0 Amps for 5 to 30 V DC maximum (resistive)
0.2 Amp for 31 to 125 V DC maximum (resistive)
Not applicable (open contact)
10ms maximum
10ms maximum
No internal fuses or snubbers.
20 cycles per minute (inductive load)
Fixed coil, moving armature
Silver alloy
Refer to appendix B
Input 240 V AC Grouped 8 Points
CPU CPU CPU CPU
001 002 005 E05
AA AA AA AA
1.0 1.5 2.1 2.1
9
IC200MDD847
DBI EBI GBI PBI
001 001 001 001
AA AA AA AA
1.1 1.0 1.0 1.0
9-35