GE VersaMax IC200PWR001 User Manual page 48

Wiring for a Compact I/O Carrier (IC200CHS022, IC200CHS025)
Each terminal on a Compact-style I/O Carrier accommodates one solid or
stranded AWG #14 (avg. 2.1mm
cross section) wire, or two wires up to AWG #18 (avg. 0.86mm
Use copper wire rated for 90 degrees C. When inserting two wires in the same
position, the wires must be the same size and type (solid or stranded).
The I/O carrier can accommodate current levels up to 2 Amps per point or 8
Amps per each power and ground, and a voltage range of up to 264 V AC.
Voltage transients up to 300 V AC will not damage the carrier.
For a Box-Style I/O Carrier, recommended terminal torque is 0.37 to 0.45 ft-lbs.
The label provided with the module can be folded and inserted in the label
holder.
Terminal Numbering for a Box- or Spring-Style Compact I/O Carrier
GFK-1504N Chapter 2 Installation
Field Wiring
Terminals
2
cross section) to AWG #22 (avg. 0.36mm
A17 A18
A13 A14 A15 A16
A7 A8 A10 A11 A12
A9
A1 A2 A3 A4 A5 A6
B17 B18
B13 B14 B15 B16
B7 B8 B9 B10 B11 B12
B1 B2 B3 B4 B5 B6
2
2
2
cross section).
2-21