Ic200Alg264, Ic200Alg266 Analog Input Module, 15 Bit Current 15 Channels - GE VersaMax IC200PWR001 User Manual

IC200ALG264, IC200ALG266: Analog Input Module, 15 Bit Current 15 Channels
Configuration Parameters
A jumper on the carrier terminals can be used to configure 4-20mA or 0-20mA
input ranges. With no jumper installed, the module accepts 4-20mA input
signals. With a jumper installed, the module accepts 0-20mA input signals.
The analog inputs are software-configurable to either default or hold last state
upon loss of module.
Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and
to frame ground
Group to group
Channel to channel
LED indicators
Backplane current consumption
External power supply
Thermal derating
Configuration parameters
Diagnostics
Compatibility
HW, FW version
FW release
Input Characteristics
Input current
Input Fault Withstand
Input Impedance
Accuracy at:
25 °C
0 to 60 °C
Resolution
Filter response (3dB Corner Freq)
Update rate per module
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded
to ±2%.
GFK-1504N Chapter 10 Analog Input Modules
15 single ended, one group
FFFFB50F
FFFFB40F
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
OK LED. See "LED Indicators" for description.
IC200ALG264: 5V = 100mA maximum
IC200ALG266: 5V = 100mA, +3.3V = 50mA maximum
None
None
Range select (jumpers on carrier)
Loss of Internal Power, Open wire detection of 4-20mA
signals only. Module IC200ALG266 only: A/D conversion
malfunction greater than 6% full scale.
PME programming
software
All
4 to 20mA (default : no terminal jumper installed)
0 to 20mA (with terminal jumper installed)
IC200ALG264: +3V; IC200ALG266: +30V
100 Ω
†
±0.3% typical of full scale, ±0.5% maximum of full scale
±1% maximum of full scale
15 bits
0.5µA = 1 counts (for 4-20mA range)
0.625µA = 1 counts (for 0-20mA range)
24 Hz ±0%
7.5ms
(when cfg for 4-20mA range)
(when cfg for 0-20mA range)
CPU CPU CPU CPU
001 002 005 E05
CE AB AA AA
2.1 2.1 2.1 2.1
10
DBI EBI GBI PBI
001 001 001 001
AB BF CF
No
1.1 2.2 2.2
10-41