GE VersaMax IC200PWR001 User Manual page 98

4
IC200CHS005
Spring-Style I/O Carrier
Din Rail Mounting
The carrier snaps easily onto a 7.5 mm x 35 mm DIN rail. The DIN rail must be
electrically grounded to provide EMC protection. The rail must have a
conductive (unpainted) corrosion-resistant finish.
For applications requiring maximum resistance to mechanical vibration and
shock, the carrier must also be panel-mounted. Refer to chapter 2 for
installation instructions.
Features

The Spring-Style I/O Carrier supports up to 32 I/O points and 4
common/power connections.

Easily-set keying dials to assure installation of the correct type of module
on the carrier. Keys can be set to match the keying on the bottom of the
module. A complete list of module keying is included in appendix D.

Carrier-to-carrier mating connectors for quick installation of the backplane
connection with no additional cables or tools needed.

Module latch hole for securely fastening the module to the carrier.

A clear protective hinged door covering the wiring terminals. The printed
wiring card provided with each I/O module can be folded and inserted in
this door.

Notches on the lower edge for attaching an Auxiliary I/O Terminal Strip if
extra bussed connection points are needed.
Carrier to Carrier
Connector
4-12 VersaMax Modules, Power Supplies and Carriers User's Manual
Module to Carrier
H
Connectors
G
F
Keying Dials
A
Field Wiring
B
Terminals
B 8 2
C 7 3
D 4
6
Module
latch hole
Transparent
protective door
GFK-1504N