GE VersaMax IC200PWR001 User Manual page 362

11
IC200ALG320
Analog Output Module, 12 Bit Current, 4 Channels
Analog output module IC200ALG320 provides four 4mA to 20mA analog
current-sourcing outputs. Including a modest amount of overrange current,
approximately 20.38mA of output current per channel is available to drive output
loads.
An external source of DC power is required for the outputs.
Intelligent processing for this module is performed by the CPU or NIU. The
module receives 4 words of analog output data.
LED Indicators
The green FLD PWR LED indicates the presence of user-side power for the
analog field-side circuits.
The green OK LED is ON when backplane power is present to the module.
Diagnostics
The module reports a Loss of User Side Power fault for field-side circuits.
Configuration Parameters
The module is easily set up with a jumper for the outputs to either hold their last
states or default to 4mA if backplane power or communications are interrupted
or the PLC is stopped. External user power must remain uninterrupted.
Outputs remain in their default or last state until the module receives different
output data from the backplane, or until field power is removed.
11-2 VersaMax Modules, Power Supplies and Carriers User's Manual
FLD
PWR
IC200ALG320
ANALOG OUTPUT 12BIT
CURRENT 4CH
1234567 831
OK
GFK-1504N