Table of Contents
Advertisement
5
Main Base, IC200CHS101
Expansion Base, IC200CHS102
Disconnect-Style Interposing I/O Terminals
Main Base – IC200CHS101
This Interposing Disconnect Base has a connector (J1) for attaching a cable
from the Connector-Style I/O Carrier and 36 box-style terminals for field I/O
wiring and power connections. The I/O Interposing Disconnect Base also has an
expansion connector (J2) that can be used to attach to an Interposing
Disconnect Expansion Base (IC200CHS102).
J1
J2
115mm (4.5in)
65mm (2.6in)
This base provides connection for the terminals on the "A" side of the VersaMax
connector (A1-A18). Two groups of common terminals (W1-W8 and X1-X8)
can be used for connecting two-wire devices without additional auxiliary terminal
blocks.
The base has an individual knife-switch disconnect for each signal and common
terminal and its corresponding pin on the VersaMax cable connector.
GFK-1504N
Chapter 5 Interposing Terminals and Auxiliary I/O Terminal Strips
5-11
Hide quick links:
Advertisement
Table of Contents
