Table of Contents
Advertisement
2
Connecting the Expansion Cable: Single-ended
For a two-rack local system with one non-isolated expansion rack
(IC200ERM002) and NO Expansion Transmitter, connect the expansion cable
from the serial port on the VersaMax CPU or NIU to the Expansion Receiver as
displayed in the following figure. The maximum cable length is one meter.
Cables cannot be fabricated for this type of installation; cable IC200CBL600
must be ordered separately.
VersaMax PLC or NIU I/O Station Main Rack
PS
CPU/NIU
1 M
VersaMax Expansion Rack
IC200CBL600
PS
ERM
No Terminator Plug is needed in a single-ended installation; however, it will not
impede system operation if installed.
Single-Ended Inter-Rack Connection Cable (IC200CBL600)
GFK-1504N
Chapter 2 Installation
2-11
Hide quick links:
Advertisement
Table of Contents
