GE VersaMax IC200PWR001 User Manual page 108

4
Features
▪
Supports redundant power supplies. Use of the second power supply is
optional.
▪
Supports "hot swap" of a redundant power supply that is de-energized.
▪
Standard PROFINET alarm and diagnostics reporting.
▪
Supports configuration using Classless InterDomain Routing (CIDR)
with subnetting and supernetting.
▪
Each network interface module can be connected into a daisy-
chain/line, star, or ring (redundant media) topology.
▪
Supports Media Redundancy Protocol (MRP) client mode operation.
▪
Can be upgraded in the field; supports firmware updates through USB
port.
Note:
The PNS module's main Remote IO functions include:
▪
Scanning all the modules within its stick (input and output scan).
▪
Publishing data onto the PROFINET network to an IO-Controller at a
customer-specified production period.
▪
Receive data from an IO-Controller on the PROFINET network at a
customer-specified production period.
▪
Managing PROFINET communication and module configuration
between an IO-Controller and modules within the PNS node.
▪
Managing the state of the I/O when communications is lost
▪
Publishing fault information (such as alarms and diagnostics) to IO-
Controller
For additional information, refer to GFK-2721, VersaMax PROFINET Scanner
Manual.
4-22 VersaMax Modules, Power Supplies and Carriers User's Manual
The USB port is for firmware upgrades only. It is not intended for
permanent connection.
GFK-1504N