GE VersaMax IC200PWR001 User Manual page 419

Module Specifications
Module Characteristics
Channels
Module ID
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
LED indicators
Backplane current consumption
Thermal derating
Configuration parameters
Diagnostics
Compatibility
HW, FW vers. FW release
External Power Supply
Recommended Range
Current consumption at recommended range
12V operation range
Current consumption at 12V range
Input Characteristics
Input current
Input Impedance
Accuracy (0V Common Mode Voltage):
25 °C**
0 to 60 °C
Resolution:
Filter response
Update rate per module
Common mode voltage
Channel-to-channel crosstalk rejection
Output Characteristics
Output current
Load characteristics:
Resistive
Capacitive
Inductive
Accuracy at 25 °C**
Accuracy at 0 to 60 °C
Resolution
Update rate per module
Channel-to-channel crosstalk rejection
Output default
** In the presence of severe RF interference, (IEC1999-4-3, 10V/m), accuracy degraded to ± 1% maximum of full
scale. Input accuracy may be degraded an additional ± 0.75% with the introduction of input common mode voltage.
GFK-1504N Chapter 12 Analog Mixed I/O Modules
Analog Mixed Module, 12 Bit Input Current 4 Channels and
4 differential inputs, one group, 2 single-ended outputs, one group
FFFF9424
250VAC continuous; 1500VAC for 1 minute
Not applicable
None
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
5V output: 50mA maximum
None
Output default
Loss of User Side Power
PME programming
CPU001 CPU002 CPU005 CPUE05 DBI001 EBI001 GBI001 PBI001
software
AA
All
1.0
4 to 20mA
200 Ω maximum
± 0.3% typ. of full scale, ± 0.5% max. of full scale
± 1% maximum of full scale
4µA = 8 counts
5.0ms
0.4ms
<30V
30dB minimum
4 to 20mA
0 to 1250 Ω maximum ( R
0.1µF maximum
0.5H maximum
± 0.3% typ. of full scale, ± 0.5% max of full scale
± 1% maximum of full scale
4µA = 8 counts
0.3ms maximum
70dB minimum
Hold Last State (default), 4mA (configurable)
Output Current 2 Channels
AA AA AA
1.5 2.1 2.1
+18 to +30 V DC (including ripple)
160mA max.(including load current)
9.6 to 15 V DC , 12 V DC nominal (including ripple)
215mA max.(including load current)
= (V
L(MAX) EXTERNAL PS
12
IC200ALG430
AA AA AA AA
1.1 1.0 1.0 1.0
- 4V) / 20.38mA)
12-3