Scenes Parameter Window - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.2.7 X scenes parameter window
The DALI gateway has 16 scenes per output. These correspond to DALI scenes. Each scene can be
assigned to any ballasts and/or groups on the output. These are referred to as scene members below.
A scene member can be a member of several scenes.
This parameter window is visible if DALI scenes are enabled in the X DALI configuration parameter
window.
DALI scenes are assigned to KNX scenes in this window. This makes it possible to integrate any of the
64 KNX scenes into the DALI.
Note
Scenes can only include members from the same output. A scene with ballasts and groups from both
outputs requires two scenes linked by a common KNX group address.
166 2CDC507164D0201 | DG/S x.64.1.1