ABB i-bus KNX Product Manual page 156

®
ABB i-bus KNX
Commissioning
"Em lighting test result (addr)"
Options:
Linked group object:
•
Yes: The Em lighting test status (addr) group object is enabled. This sends the test result for the
emergency lighting test on the KNX.
•
No: The result of the emergency lighting test is not sent for the output on the KNX.
The result is sent whenever a change occurs, so no result is lost provided there is a connection between
the emergency lighting converter and the gateway.
On KNX recovery the latest results are sent if they are different from the previous ones sent.
The last result of the currently selected emergency lighting converter is sent on request.
"Stop all em lighting tests"
Options:
Linked group object:
•
Yes: The Stop all em lighting tests group object is enabled. This object is used to stop all emergency
lighting tests. Running tests are interrupted. Pending tests are canceled.
•
No: The Stop all em lighting tests group object is not enabled.
154 2CDC507164D0201 | DG/S x.64.1.1
Yes
No
Em lighting test result (addr) (2 byte)
Yes
No
Stop all em lighting tests